FEATURES
VIEWING HEAD:
The ML8000 Series Metallurgical Microscope is
equipped with either an erect image binocular or
regular trinocular viewing head inclined at 30o and
rotatable through 360o for comfortable viewing.
Each eyetube is provided with a graduated dioptre
adjustment.  Interpupillary distance is adjustable between 52mm and 72mm .
EYEPIECES:
Paired DIN KHW10X super wide 20mm field of view
eyepieces.
OBJECTIVE CHANGER: 
Smooth operating quintuple ball-bearing nosepiece.
OBJECTIVES:
Infinity corrected, S. Planachromat M4Xl0.10, MlOX/
0.25, M20Xl0.40, M4OX/0.65 
ILLUMINATORS: 
Vertical full Koehler illuminator with 6V 30W halo- 
gen lamp for brightfield and polarization technique,
with infinity lens. Electronic transformer with inten-
sity control supplied in a separate case. Blue clear,
green clear, NDS Neutral density and polarizing fil-
ters supplied in mounts.
Transmitted Koehler illuminator with 6V 30W halogen
lamp with electronic transfomer and intensity control
built in the microscope base.
STAGE:
Large scan 4" x 4" ball-bearing mechanical stage
with 94.5mm diameter clear glass stage plate, with
drop-down coaxial axis controls with XlY movement.
CONDENSER:
Rack and pinion focusable substage condenser with
iris diaphragm and filter tray, including clear blue
filter.
FOCUSING MOVEMENT:
Coaxial low position coarse and fine focus controls,
graduated to 2 micron per division, are fitted with
tension adjustment and safety autostop. The focusing
range is 35mm.  The movement runs in extra wide
precision ball-bearing tracks.

© 1999-2002 A-Z Microscope Corporation. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of A-Z Microscope® Company is prohibited.